SRU Insulation logo

Acoustic Db board 15mm - High Performance Phonestar Soundproofing Boards

Acoustic Db board 15mm - High Performance Phonestar Soundproofing Boards
£35.40
*

description added size action
Brochure 20/12/2018 4.43MB download

The 15mm Acoustic Db  board (Phonestar Insulation Boards) on its own has been certified to reduce Airborne Sound by a very high 36 Decibels. When the acoustic plasterboard is then added to a wall, floor or ceiling structure, the overall Airborne Sound Insulation result of the complete structure will be much higher.

The Acoustic DB boards (Phonestar Insulation Boards) reduces Impact Sound by a very significant 21dB  when laid on the industry standard concrete test floor. The overall impact sound insulation result of the complete floor and ceiling structure can also be tested and this laboratory result in Decibels is denoted by Ln,w. Please note that when comparing Impact Sound Insulation results of the complete floor structure, the lower the result the better the reduction in impact sound.

Benefits:

  • Extremely versatile soundproofing board for walls, floors and ceilings and most soundproofing applications
  • Significant reduction in both impact and airborne noise
  • Only 15mm thick, so minimal space loss to any area ( We also stock the 10mm Boards)
  • Part E compliant
  • Natural, breathable product
  • Excellent with underfloor-heating
  • Leaves a solid floor finish ready after installation

Product Specifications:

  • 1200mm x 800mm x 15mm (18kg/m2)

Performance:

  • 36dB (Rw, -4Ctr) Airborne sound insulation
  • 21dB (Delta Lw) Impact sound insulation

Performance on Timber floor with Resilient Bars on ceiling

  • 59db( Rw,-6Ctr) Airborne sound insulation
  • 56db ( Lnw) Impact sound insulation

​*manufacture tested data

Cutting & Sealing Boards

The Db boards can be cut with most hand tools, be careful to keep board flat when cutting otherwise you will lose the sand. If this does happen keep a dustpan and brush to sweep it up and refill the board.

Sealing Board after Cutting

Use the specially designed tape to re seal the boards after cutting. Using a standard gaffer tape will not work as it will not get a perfect seal.

Installing the Db boards

Always stagger the joins when installing the Db boards

 

Write a review



Note: HTML is not translated!

Bad           Good




Enquire About This Product